EN - 13
Menu P7
¨
Reading malfunctions (and system information)
(Malfunction) information values
Submenu
Description
Minimum
Maximum
General
Reset
P70
Current software version.
Version number of the software (without “v”)
P71
Most recent malfunction.
Code in accordance with alarm and malfunction alert
P72
Malfunction before the most recent one
Code in accordance with alarm and malfunction alert
P73
Malfunction before the most recent two
Code in accordance with alarm and malfunction alert
P74
Resseting malfunction(s)
■
Set value to '1' and press "OK" on the ComfoSense
panel.
0
1 (= activate)
0
P75
General reset.
■
Press "OK" on the display or the ComfoSense panel for
at least 5 seconds to carry out a
general reset.
All original software settings are restored
following a general reset.
0
1 (= activate)
0
Note:
After a general reset, the ComfoAir will ask you to reset the “nL / HL” (see P56) and “Li / Re” (see P57) settings.
Following a general reset, all settings and programmes need to be checked and set to the right value.
P76
Self-testing the ComfoAir
0
1 (= activate)
0
■
The ComfoAir will run at maximum Rotation Per Minute (RPM).
■
The bypass valve will open and close.
P77
Resetting filter dirty counter
0
1 (= activate)
0
Note:
This resets the counter that triggers a dirty filter alert on the ComfoAir. This allows the filter to be cleaned or replaced before
the dirty filter alert appears.
Menu P8
¨
Setting the RF input and digital inputs (0-10V)
Analogue input values
Submenu
Description
Minimum
Maximum
General Reset
810
Analogue input 1
0= not fitted 1= fitted
0
1
0
811
0= controlling 1= programming (analogue input 1)
0
1
0
812
set point analogue input 1
(programming)
0
100
50
813
min. setting analogue input 1
0
99
0
814
max. setting analogue input 1
0
100
100
815
0=positive analogue input 1 1=negative setting analogue
input 1
0
1
0
816
read-out analogue input 1
0
100
-
820
Analogue input 2
0= not fitted 1= fitted
0
1
0
821
0= controlling 1= programming (analogue input 2)
0
1
0
822
set point analogue input 2
(programming)
0
100
50
823
min. setting analogue input 2
0
99
0
824
max. setting analogue input 2
0
100
100
825
0=positive analogue input 2 1=negative setting analogue
input 2
0
1
0
826
read-out analogue input 2
0
100
-
850
n/a
0
1
0
851
n/a
0
1
0
852
n/a
0
100
50
853
n/a
0
99
0
854
n/a
0
100
100
855
n/a
0
1
0
856
n/a
0
100
-
n/a
