2. Advanced settings
1. Battery parameters
3. Depth of discharge
✔
1.Basic settings
5. Select EPS mode
1.EPS control mode
1.Enable EPS mode
✔
1.Disable EPS mode
To enable the EPS (OFF-GRID) mode:
1. The EPS mode must be enabled from the display.
2. The following parameters must be set from the Depth of Discharge
menu.
Note: During operation in EPS mode, if the batteries are sufficiently charged, the system will be able to deliver a
maximum alternating current equal to:
•
System with one Pylontech battery: 5 A (1,100 W)
•
System with two Pylontech batteries: 10 A (2,200 W)
•
System with three or more Pylontech batteries: 13 A (3,000 W)
•
System with one or more WECO batteries: 13 A (3,000 W)
In the event of a
blackout
, the alternating voltage supplied by the grid will be lost; this condition will cause
the internal contacts of the hybrid inverter to switch over which, once the set activation time has expired, will
continue to supply an alternating voltage of 230V to the LOAD output, supplying power only to the critical
loads according to the availability of the batteries and PV system.
230V
0.00V
19.5 EPS MODE (OFF GRID) - MENU ENABLING
NOTE: with this configuration, the system becomes an IT system during a blackout.
Summary of Contents for Azzurro HYD 3000 ES
Page 1: ...QUICK INSTALLATION GUIDE HYBRID INVERTER ...
Page 24: ...23 DATASHEET ...
