1.1K~3.3KTL-G3
User manual
- 21 -
Procedure:
Step 1
Remove the insulation layer with an appropriate length using a wire
stripper, as shown in Figure 4-2.
Figure4-2 Preparing a ground cable (1)
Note
：
L2 is 2 to 3mm longer than L1
Step 2
Insert the exposed core wires into the OT terminal and crimp them by
using a crimping tool, as shown in Figure 4-3.
Figure4-3 Preparing a ground cable (2)
Note 1:
L3 is the length between the insulation layer of the ground cable and the
crimped part.L4 is the distance between the crimped part and core wires protruding from the
crimped part.
Note 2:
The cavity formed after crimping the conductor crimp strip shall wrap the core
wires completely. The core wires shall contact the terminal closely.
Step 3
Install the crimped OT terminal, flat washer using M5 screw, and
tighten the screw to a torque of 3 N.m using an Allen wrench.
Figure4-4 Ground terminal composition
