zaxe X3, User Manual

Page: 17 / 56

4. Introduction
17
Pre-Printing
This process should always be done while the
print table is cold!
Apply 4-6 layers of glue stick to your PEI
Surface in opposite directions.
Usage of glue sticks differs depending on the
material. Usually for the PEI Surface there is
no need to apply glue stick but, if there is an
adhesion problem do not hesitate to apply it.
After a while, glue will lose it’s function.
Do not reapply it without cleaning the PEI
Surface. You can clean the table with a damp
towel then reapply the glue when it’s dry.
Before printing with your device, applying glue stick
to your print surface is crucial. This process ensures
that your print will stick to the PEI Surface firmly.