23
SMART SYSTEMS FOR ACCESS CONTROL
Power Connection Between Control
Box and Opener (Actuator)
Battery Installation
NOTE:
The battery that accompanies the Zareba
Automatic Gate Opener will already be installed in either
the left or right battery compartment. The extra battery
compartment accommodates an optional second
battery.
Step 12
(fig. 22)
Ensure the battery is secure by inserting the battery
strap through the battery strap slots in the battery
compartment.
Important Information About the
Gate Opener Battery:
Upon initial installation, the battery may not be
charged adequately. To ensure proper operation allow
the battery to charge prior to operation. The battery
can be charged in one of two ways:
1. Disconnect the battery from the control board, and
hook up to a 2 amp battery charger (not provided).
2. Ensure battery and AC power is properly connected.
Do not operate the gate for 4 hours allowing the bat-
tery to charge.
While the battery is charging, the red CHARGING light
will be illuminated. Once fully charged, the red CHARG-
ING light will no longer be illuminated. The normal
operating range of the included sealed lead-acid battery
is 12 to 14 volts. Avoid severe discharge to ensure long
battery life.
ILJXUH
Battery strap
Battery
Figure 22