21
SMART SYSTEMS FOR ACCESS CONTROL
Step 8
(fig. 18)
Attach the gate bracket to the gate by
inserting four 3/8” x 3” carriage bolts
through the gate bracket and the drilled
holes in the gate. Fasten each carriage bolt
with one 3/8” washer, one 3/8” lock wash-
er, and one 3/8” hex nut.
Installing the Gate Stop Plate
NOTE:
Mounting hardware for the
gate stop plate is not included. For
wood gates, use wood or lag screws.
For tube or chain gates, use U bolts.
Step 9
(fig. 19)
With the gate in the desired closed
position, loosely fasten the gate stop
plate to the middle of the gate
between the top and bottom at the
end of the gate. Ease the gate stop
plate into position so that it overlaps
the fence post. When this position is
reached, securely tighten the gate
stop plate hardware.
Top View
Side View
Gate frame
Gate frame
Closed-position
stop plate
Fence post
Fence post
Gate hinge
Closed position
stop plate
Figure 19
3/8” hex nut
3/8” lock
washer
3/8” washer
3/8” x 3 ”
carriage bolt
Figure 20
Gate bracket
