To set the duration time
1. Press button " + " or " - ".
2. After the setting is carried out, wait for 5 seconds: the
"Cooking Duration" pilot lamp will come on and
the display will revert to the time of day.
3. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
while the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
Turning the acoustic alarm off will reset the oven to
manual, and if the oven function and the thermostat knobs
are not set to zero the oven will start to heat again.
To cancel the duration time
1. Press button repeatedly to select the “Cooking
Duration” function. The relevant pilot lamp will
flash and the display will show the remaining cooking
time.
2. Press button " - " until the display shows “0:00”. After
5 seconds the pilot lamp will go out and the display
will revert to the time of day.
End of cooking
With this function, you can set the oven to switch off au-
tomatically when a programmed end of cooking time is
over. Place food in the oven, select a cooking function
and adjust the cooking temperature. Press button re-
peatedly to select the “End of cooking” function. The rel-
evant pilot lamp will start flashing.
To set the End of cooking time
1. Press button " + " or " - ".
2. After the setting is carried out, wait for 5 seconds: the
“End of cooking” pilot lamp will come on and the
display will revert to the time of day.
3. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
and the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
Turning the acoustic alarm off will reset the oven to
manual, and if the oven function and the thermostat knobs
are not set to zero the oven will start to heat again.
To cancel the End of cooking time
1. Press button repeatedly to select the “End of
cooking” function. The relevant pilot lamp will
flash and the display will show the programmed End
of cooking time.
2. Press button " - "until the display shows the current
time of day. The programmer will beep and the pilot
lamp will go out.
Cooking duration and End of cooking time
combined
The functions “Cooking duration” and “End of cooking
time” can be used simultaneously to set the oven to switch
on and off automatically at a later time.
1. With the “Cooking duration” function (carry out
the cooking duration setting as described in the rel-
evant chapter) set the duration time. Then, press but-
ton and the display will show the programmed
setting.
2. With the “End of cooking time” function (carry
out the End of cooking setting as described in the
relevant chapter) set the end of cooking time.
The relevant pilot lamps will come on and the display
will show the time of day. The oven will switch on and
off according to the set programmes.
7
