background image

• Do not operate the appliance by means of an external timer or

separate remote-control system.

• Unattended cooking on a hob with fat or oil can be dangerous

and may result in fire.

• Never try to extinguish a fire with water, but switch off the appli-

ance and then cover flame e.g. with a lid or a fire blanket.

• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids should not

be placed on the hob surface since they can get hot.

• Remove any spillage from the lid before opening. Let the hob sur-

face cool down before closing the lid.

• Do not use harsh abrasive cleaners or sharp metal scrapers to

clean the glass door since they can scratch the surface, which
may result in shattering of the glass.

 Safety 

instructions

Installation

Warning!

 Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied

with the appliance.

• Always be careful when you move the appli-

ance because it is heavy. Always wear safety
gloves.

• Do not pull the appliance by the handle.

• Keep the minimum distance from the other

appliances and units.

• Make sure that the appliance is installed be-

low and adjacent safe structures.

• The sides of the appliance must stay adja-

cent to appliances or to units with the same
height.

• Do not install the appliance on a platform.

• Do not install the appliance adjacent to a

door or under a window. This prevents hot
cookware to fall from the appliance when the
door or the window is opened.

Electrical connection

Warning!

 Risk of fire and electrical shock.

• All electrical connections should be made by

a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power sup-
ply. If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and exten-

sion cables.

• Make sure not to cause damage to the mains

plug and to the mains cable. Contact the
Service or an electrician to change a dam-
aged mains cable.

 

3

www.zanussi.com

Summary of Contents for ZCG560N





















Reviews: