Zanussi LIBERO IWOKEC-1P/1ZT, Service Manual

Page: 41 / 75

41
LIBERO LINE WOK INDUCTION
4.8.2.1 BUZZER MODE
Set the Buzzer mode. Available modes are “b0” and “b1”.
b0 : Full buzzer use as described in this document;
b1: Reduced buzzer use. Buzzer is normally disabled except:
Switch ON
Switch OFF, no matter if manual or automatic
Safety switch OFF routine with 5 “BEEP” sequence
Temperature Set Point reached (Preheating / Pre-cooling animation stop);
Cleaning end
All operations inside CUSTOMER MENU, including menu access sequence;
All operations inside SERVICE MENU, including menu access sequence.
SET BEEP MODE:
Every single pressure
on the
“ + ” key cyclically
change the Beep mode.
The user enter the
CUSTOMER
(Example only, current
Beep mode maybe
“ b0 ”
or “ b1 ” )
Beep mode = b0: Full buzzer use (Example only)
“ BEEP ”
“ BEEP ”
Once selected the desired Beep mode, user can press “ - ” key to switch to “ Hob2Hood ” setting page, press On/Off key to
exit CUSTOMER MENU or wait 8 sec to automatically exit from CUSTOMER MENU .
Exiting the Beep Mode page the new mode is stored . In case of power failure the setting is unchanged.
Beep mode = b1: Reduced buzzer use
Beep mode = b0: Full buzzer use
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
0 60 200 280 0 60 200 280
°C °C
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 0 60 200 280 0 60 200 280
°C °C
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 0 60 200 280 0 60 200 280
°C °C