Zanussi LIBERO IWOKEC-1P/1ZT, Service Manual

Page: 43 / 75

43
LIBERO LINE WOK INDUCTION
4.8.2.3 ALARM HISTORY
VIEW ALARM
HYSTORY:
User touch the “ + ” key
to view the alarm
history.
The user enter the
CUSTOMER MENU and
select the Alarm
History item .
Alarm History initial page
Alarm History initial page
“ BEEP ”
(Example for E821)
Zone 1 Zone 2
5 x (5 sec)
Step 1
Step 2
Step 3
The last 5 stored alarm codes are displayed, starting with the newest occurred to the oldest one.
Every alarm code is displayed for 5 seconds (2 times) following the standard visualization scheme .
Alarm codes appears in the same position where they originally appeared in ON state, meaning on one display only or
replicated on both .
NOTE: The sequence is always executed 5 times. If less than 5 alarm codes are stored then the UI is completely off for
void positions until the final timeout is reached.
At the end of the
sequence the UI
automatically return to
the Alarm History initial
page.
Alarm History initial page
“ BEEP ”
User can press “ - ” key to switch to “ Beep mode ” setting page, press “ + ” key to restart alarm history visualization, press
On/Off key to exit CUSTOMER MENU or wait 8 sec to automatically exit from CUSTOMER MENU .
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
0 60 200 280 0 60 200 280
°C
°C
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 0 60 200 280 0 60 200 280
°C °C
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 0 60 200 280 0 60 200 280
°C °C
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 0 60 200 280 0 60 200 280
°C °C
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
0 60 200 280 0 60 200 280
°C °C
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
0 60 200 280 0 60 200 280
°C °C
Up to 5 alarm codes are showed, starting from the newest one to the oldest one.