18
LIBERO LINE WOK INDUCTION
2
INSTALLATION
AND
COMMISSIONING
2.1 GENERAL INSTALLATION
All the non-standard or out-of-standard situations should be reported on the commissioning form and duly
documented for future reference. The documentation available on the web sites (PRIDE-SERVICE PORTAL-
AGELUX etc..) In case of any doubt, refer to your local country customer care.
UNPACKING
AND
POSITIONING
THE
EQUIPMENT
ROOM
REQUIREMENTS
To guarantee continuous operation, the room temperature range must be between
5°C and 40°C
.
Outdoor functioning is strictly allowed only if the machine can be protected against any conditions being out of
the above temperature range and against any atmospheric agents.
On a hot cupboard base take precaution to install a baffle for preventing hot air to reach the oven fresh air
intake; this could create malfunctioning.
High room humidity may cause water to condensate on electric components hence causing short circuit.
WARNING / CAUTION !
Before any operation on the machine read Chapter
. We recommend for any phase involving the removal of
the packaging to use cut-resistant gloves
Summary of Contents for LIBERO IWOKEC-1P/1ZT
