Zanussi LIBERO IWOKEC-1P/1ZT, Service Manual

Page: 22 / 75

22
LIBERO LINE WOK INDUCTION
APPLIANCE REQUIREMENTS
2.1.5.1 POWER (VOLTS)
Refer to the volts range data indicated in the tech specs table § TECHNICAL DATA
2.1.5.2 AIR CIRCULATION
The appliance does not have aeration slots on the top surface; underneath is located the inlet / outlet passage
slots. The inlet passage is also equipped with removable metal mesh filters that can be removed to be washed
with warm water and soap.
Drop in appliances have air intake limitations, please refer to § AIR REQUIREMENTS
2.1.5.3 APPLIANCE LOAD
It is possible to "load" the appliances with a total weight of 40kg distributed across the surface in pots suitable
for induction use and of a max diameter of 28cm.
EXAMPLE:
Let’s do some considerations for a cooking zone: For example a standard pot used in professional
cooking would be a pot of 30cm diameter (so the bottom would be approx. 28cm) and if it was 25cm high it
would contain approx. 18 liters of water, add like 2kg for the pot, that would make 20kg (pot and water)..... if
you multiply per 2 zones= 40kg... approx.
WARNING!
Bbigger diameter pots than those indicated, if detected by more than one zone (valid only for two
zone appliances) could damage the generators. It is also
not suggested to let the pot rest on the
border stainless top, it must fit only on top of the glass .