This manual is published for informational purposes only and the information so provided should not be considered
as all-inclusive or covering all contingencies. If further information is required, Zanotti Corporation should be
consulted.
Sale of product shown in this manual is subject to Zanotti terms and conditions including, but not limited to, the
Zanotti Warranty. Such terms and conditions are available upon request. Zanotti warranty will not apply to any
Equipment that has been altered outside the manufacturer’s plants.
DISCLAIMER:
Manufacturer is not responsible and will not be held liable in contract or in tort (including negligence)
or any special, indirect or consequential damages, including injury or damage caused to vehicles,
contents or persons, resulting from the installation of any Zanotti product or its mechanical failure.
The maintenance information in this manual cover unit models: Z120 ALL VARIANTS
For further information, refer to: Z120 Series Parts list - WEB
0MDL176 C - NSA PARAMETERS TABLE
0MDL178 C - NSA - Zer0 series - Maintenance Schedule
The information in this manual is provided to assist Authorized Zanotti Dealerships and
Service Centers.
Recover Refrigerant
Zanotti Spa recognizes the need to limit the potential harm to the ozone layer that can result from
allowing refrigerants to escape into the atmosphere. Zanotti defers to the local jurisdiction and
promotes only approved procedures when handling refrigerant.
We strictly adhere to a policy that promotes the recovery and limits the loss of refrigerant into the
atmosphere.
In addition, service personnel must be aware of Federal regulations concerning the use of refrigerants and
the certification of technicians. For additional information refer to the E.P.A.
