Installation & Getting Started
- 8 -
3. Hardware Installation
For controlling a
Zennium-ECW
system a Windows computer is needed. We recommend using the 3-
button-mouse shipped with the system.
For connecting the hardware proceed as follows:
1. Connect
Zennium-ECW
and the computer to main power supply.
2. Connect
Zennium-ECW
port to a free USB port of the computer.
(Only use HIGH QUALITY USB
EXTENSION
–shipped with workstation-. Low quality USB cable, USB extensions and/or hubs can
lead to artefacts in measurements and possible damage to device or setup under investigation)
.
3. Connect optional devices to the
Zennium-ECW
as described in the manual of the optional device.
4. Switch on the computer and the
Zennium-ECW.
main jack
main switch
fuse holder with
main power supply
voltage display
3.1 Switch Main Voltage and Main Fuses
Push snap-in nose to release fuse bracket.
Fuses for 115V: 2x 4A T (slow)
Fuses for 230V: 2x 2A T (slow)
Pull tray to switch input voltage corresponding to the main
voltage (115V / 230V)
The selected main voltage is visible at the fuse holder bottom
