Installation & Getting Started
- 15 -
4.2 Installation of the Calibration Data
The calibration data are individual for each device. Click on the
setup.exe
file from the Zahner USB to
install the Calibration data. For the installation of the Calibration data, administrative access to the PC
is required. The USB contains the calibration data for the complete system including
Zennium-ECW
and all optional devices like external potentiostats, light sources (CIMPS), HiZ probe, etc. you ordered
with the workstation.
Click on the
Calibration
Data Only
.
Click
Perform
.
Choose preferred language.
!
The installation of the Calibration data from USB is required to achieve the accuracy
specified for the workstation and its options. If you miss installing the calibration data
you will lose accuracy and get artefacts!
Start installation.
The installation is complete now!
