Installation & Getting Started
- 19 -
6. Classic Mode
You can change into Classic Mode by clicking on the Classic Mode button in the ThalesXT main
menu. This gives access to more methods and in some cases more details. If you selected a method
before entering Classic Mode, ThalesXT will directly jump to the corresponding Classic Mode page. If
you would like to work in Classic Mode every time you start ThalesXT, open the file c:\flink\usb.ini and
change the parameter “simple =0”. “simple = 1” selects the ThalesXT mode.
In Classic Mode you will get the following main menu:
This menu is leading you to the main pages of the methods implemented. By pointing (not clicking) on
the icons some of them are showing up a sub-menu with additional icons. Clicking on an icon will bring
you to the appropriate software section. The following program sections are available:
Main icon Sub-menu icon Program section
-
-
Test sampling, Check Cell Connections
-
Impedance Spectroscopy (EIS) Measurements
-
Series EIS Measurements
Current/Voltage Curves
Cyclic Voltammetry
Polarization
Multi-Cell Current/Voltage Curves
Capacity/Voltage Measurements
Capacity/Voltage Analysis
