Taping Wings For Strength
Vacuum the dust from the cores, beds and the work
bench. Make sure that all of the radio parts are covered before spraying. Lay the wing in
the bottom bed top-side up. Apply a coat of 3M Super 77 spray adhesive to cover the
top of the entire wing. Allow the adhesive spray to dry at least 30 minutes. Repeat this
procedure on the other side.
(See Figure 10)
Wrap a strip of 2” fiber tape around the trailing edge.
page 8
Figure 10
Make sure that the glue used to hold the spars is dry. Apply a strip of 2” fiber tape over the spars.
Wrap a strip of 2” fiber tape around the leading edge.
