36
CONFIDENTIAL
DOC-USR-0093-03
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
RUNNING THE DECODER
9.0
The Z3-SBE264-25 can also be configured as a decoder. To see an example of this follow the steps below.
9.1
Create a .ts File using the Encoder
(12)
Follow the steps in Section 7.0 to access the GUI and to stream a TS stream.
(13)
Follow the instructions in Section 7.13 to save the stream to a TS file. The pictured example uses
the file “encode_mve-150.ts”.
9.2
Connect the Output
(14)
Connect an HDMI cable to HDMI out of the unit (bottom HDMI port).
(15)
Connect the other end of the HDMI cable to an HD Monitor.
9.3
Set Decoder Mode
(16)
Change “Operating Mode” in the lower right corner of any tab to “Decoder”:
Figure 28 Changing to Decoder Mode
Change here to
“Decode” Mod
e
Connect HDMI Out
