24
CONFIDENTIAL
DOC-USR-0093-03
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
7.10
Streaming RTP
Once you have UDP streaming, it is relatively simple to change to RTP streaming. All that is needed is
one parameter change. To stream using RTP, complete the following steps:
In the CH1 configuration tab, click on “stop” to stop the current encoding session.
(19)
Change “Output Format” from “UDP” to “RTP.”
(20)
Click on “start” to start the RTP encoding session. At this point your settings should look like the
(21)
following:
Run VLC on your PC (version used by Z3: 2.1.5)
(22)
In the “Open Media” box, type “rtsp://{IP Address}/z3-{ch #}{m}.mp4”, where {IP Address} is the IP
(23)
address of the Z3-SBE264-25, {ch #} is 1 for CH1 or 2 for CH2, and {m} is added if a multicast
address is being streamed. For example, if the IP address of the Z3-SBE264-25 is the default value
of 192.168.81.68, encode is being done from CH1, and unicast streaming is being done, the user
would type in “rtsp://192.168.81.6/z3-1.mp4”:
Change to “RTP”
Figure 12 Channel 1 Configuration Screen for RTP
