10
DOC-USR-0034-08
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
Finding the Z3-MVE-20 on the Network using ZFinder
6.3
ZFinder is a PC Utility that allows you to find any Z3 Technology product on your network. If you have
not downloaded this to your computer, you can find it on the USB drive provided with your system.
Verify your PC is set to DHCP. If it is set to a static IP address, ZFinder will be unable to discover
(5)
your encoder, or it will appear in red and you will be unable to proceed further.
Run the “ZFinder” PC Utility on your Windows PC. The ZFinder window appears. ZFinder completes a
(6)
scan of the network and lists the location of all Z3 systems connected to the network. In this case,
the Z3-MVE-20 appears.
Click on the Z3-MVE-20 entry in the window to select it. This will cause the “Edit Device,” “Open
(7)
Device” and “Flash LEDs” boxes to activate.
*Note
:
Selecting “Edit Device” allows for manual changes to network settings. Selecting “Flash
LED’s” is helpful if multiple encoders are connected to the network.
(1) Turn on Power
(2) Status lights up after 45-60 seconds
Figure 5 Z3-MVE-20 Power Switch and Status Light
Figure 6 ZFinder with Z3-MVE-20 Selected
