31
DOC-USR-0034-08
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
Exit the browser and restart it (or create another browser window). In the new browser, enter the IP
(4)
address of the Z3-MVE-20. When you do so, the same authentication window that appeared in step
(3) will appear. Enter “admin” and the password as you did previously.
9.0
SUMMARY OF OPTIONS
Options in Both the Encoder and Decoder Mode
9.1
set name
-----
Set name for the Z3-MVE-20.
set pass
-----
Assign a password to the Z3-MVE-20.
UPDATE [Button]
-----
Update firmware (see page 28).
Local IP Address
192.168.X.XX (
192.168.0.65
)
Sets the IP address of the Z3-MVE-20.
When in DHCP mode, this field is not
applicable.
Local Netmask
255.255.X.X (
255.255.0.0
)
Sets the netmask of the Z3-MVE-20.
When in DHCP mode, this field is not
applicable.
Default Gateway
192.168.X.XX (
192.168.0.1
)
Sets the network gateway to use for the Z3-
MVE-20. Can generally leave as
“192.168.0.1”
When in DHCP mode, this field is not
applicable.
Use DHCP [Checkbox]
Checked
Unchecked
Sets whether DHCP is used to dynamically
obtain an IP address at start up.
Load Factory Default
Settings [Button]
-----
Load settings installed at the factory.
Load User Settings
-----
Load user settings previously saved.
Save User Settings
-----
Save current settings for later use.
Encoder Options
9.2
Parameter
Options (default in bold)
Notes
Video Source
SDI
HDMI
Component
Composite
VGA
The input source for encoding.
Audio Source
Analog Jacks
Channels 1+2
Channels 3+4
Channels 5+6
Channels 7+8
Where to get audio. Channels 1+2 to 7+8
specify which of four audio channels from
the SDI or HDMI input to select. “Analog
Jacks” refers to the right and left “Audio
Input” jacks.
