Z3 Technology Z3-MVE-20 User Instructions Download Page 2

Page: 2 / 37

DOC-USR-0034-08

____________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

Revision History

Version

Date

Change Note

Author

1.02.02

08/29/2011 Original System

1.02.06

09/01/2011 Firmware Upgrade

1.03.01

11/02/2011 Firmware Upgrade, Edited Images

1.06.04

02/13/2012

Associated version number with software release version. Added Troubleshooting
section.

1.06.04a

10/10/2013 Modified various explanations to add more detail.

1.06.07

01/13/2014

Updated screenshots to match release 1.06.07, modified Section 5 to use “ZFinder”,
added Section 5.7 on using DHCP, combined encoder and decoder parameter
summary into 1 section.

1.06.07a

02/27/2014 HW Warranty, Temp & Humidity, Video Resolution, and MAC Address added

1.06.09

04/18/2014 Updated screenshots, added RTMP

1.06.09a

08/19/2014 Updated photo, dimensions and formatting

1.06.09b

10/27/2014 Updated Included Parts List, added Appendix B, Formatting

1.06.09c

01/12/2014

Added latency note Section 5.8, Updated note in section 8.2.2 and updated Hardware
Warranty link in Appendix C

1.06.26

03/04/2014

Added Quick Start Guide, Closed Captioning support, Supported Resolutions and
Password Feature note. Updated Summary of Options

1.06.26a

07/15/2016 Changed to DHCP default, Updated Warranty Information

Summary of Contents for Z3-MVE-20






































Search results

Summary of Contents for Z3-MVE-20

Reviews:

Related manuals for Z3-MVE-20

Brands by name

Popular brands

Z3 Technology Z3-MVE-20, User Instructions

Search results

Summary of Contents for Z3-MVE-20

Reviews:

Related manuals for Z3-MVE-20

Brands by name

Popular brands