FV4K-DCK-1X User Instructions
DOC-USR-0127-07
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
79
16000 Hz
Bit Rate
12
–
384 Kbps
(128 Kbps)
Target bitrate for audio encode.
The bitrate range for AACLC is 12-384 Kbps
(though 64 Kbps or higher is recommended
for best results). The bitrate range for
AACHE and AACHE V2 is 32
–
64 Kbps.
Source
MIC Line-In
MIC
Select
MIC Line-In
when using a non-
powered/non-amplified microphone.
Select
MIC
when using a powered/amplified
microphone.
Multicast IP*
(RTSP Only)
w.x.y.z
225.1.2.3
Used to specify the default multicast
address for audio rtsp stream.
Rtp Port (RTP Only)
0
–
9999 (
8700
)
Destination port for RTP audio.
Pid
*
(UDP/TSRTP/TSFILE Only)
0
–
8191
(120)
Audio PID for transport stream.
Max PTS-PCR
*
(UDP/TSRTP/TSFILE
Only)
0
–
8191
(250)
Maximum difference between the PTS and
PCR in the audio stream. It is generally
recommended to leave this value at 250.
Certain decoders may require a value similar
to the video delay. If an issue is
encountered with a specific decoder, try
setting this value to the same value as the
video delay.
Output Setup
Output Format
RTP
RTSP
UDP
TSRTP
TSFILE
Output format of the encoded IP stream.
If UDP is selected, don’t forget to check the
value of TS Rate to make sure it is in line
with expectation.
