FV4K-DCK-1X User Instructions
DOC-USR-0127-07
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
40
(2)
Return to the user interface, and if necessary, click on the
Stop
button in the
Channel Controls
section of the user interface CH1 tab or the
Stop All
button in the lower right corner of the screen of
any tab.
(3)
Verify
Audio Enable
is set to
True
and set your desired values for
Codec
,
Sample Rate
and
Bit Rate
.
(4)
Select the appropriate option from the
Source
dropdown menu corresponding to your microphone:
a.
MIC Line-In
should be used with non-powered/non-amplified microphones.
b.
MIC
should be used with powered/amplified microphones.
(5)
Set
Audio Enable
to
False
to disable encode of the audio input.
6.11
Composite Pass-Through
The FV4K-DCK-1X allows for the currently encoded content to be passed through to the Composite
output while the unit is streaming. This allows the camera content to be viewed on a TV or other display
monitor.
Figure 41 CH1 Tab Configuration – Microphone Audio Settings
(1) If necessary, click “Stop”
(5) Click “Start”
(3) Set values
(2) Verify is
“True”
(4) Set to correspond
with microphone
