49
DOC-USR-0264-05
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
14.4
Changing the IP Address via the HTTP-based User Interface
To set your unit to a different static IP address, complete the following steps:
(1)
The first step is to set up a custom configuration so that the manual networking settings are used the
next time the system boots up. To do this, see Section 14.2.
(2)
Select yo
ur newly created configuration from the “preset” dropdown menu at the bottom of the
screen. As soon as you select your configuration, the screen will reload.
(3)
Return to the System Setup tab.
(4)
Enter in your desired network settings including “
Local IP Address
”, “
Local Netmask
”, “
Default
Gateway
”, “
DNS Server IP 1
”, and “
DNS Server IP 2
”.
(5)
Click on the “Save” button.
(2) Click “Save”
Figure 39 Saving Updated Network Settings
(1) Enter New IP Address
and desired network settings
