24
DOC-USR-0264-05
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
12.0
KEL CONNECTIONS
12.1
KEL Cable Warning
If you intend to use your FVXK/FSDI-13A-RPS
’s KEL connections
, you will need to connect it to your
chosen Sony camera block. The FVXK/FSDI-13A-RPS assembly has two 30-pin KEL connectors on J5 and J7
that allow a flexible ribbon cable to be used to connect the encoder assembly to an identical connector
on a 4K or HD Sony block camera.
WARNING: If a 4K KEL camera is plugged into the LVDS ONLY KEL connector on the
FVXK/FSDI-13A-RPS it will destroy the FVXK/FSDI-13A-RPS and the camera. This is also true
if a LVDS ONLY KEL camera is plugged into the 4K KEL connector on the FVXK/FSDI-13A-RPS.
These actions VOID warranty. It is also important to note that the FV4K-13A-RPS supports 4K
camera ONLY on J5 and HD only on J7.
12.2
KEL Connection
(1)
Connect the KEL ribbon cable to the Sony block camera. (Gold teeth face up)
(2)
Connect the other end of the KEL ribbon cable to the Interface Front PCB. (Gold teeth face away
from PCB’s)
WARNING: Only use a Z3 approved KEL ribbon cable to connect Z3’s boards to the Sony camera.
Using an incorrect cable (the cables provided by Sony) can permanently damage the boards or
camera.
The KEL cable is sold separately. Ordering part number: CBL-0028-01
