Z-World OP7100 User Manual Download Page 64

Page: 64 / 122

OP7100

Software

 int op71GetPfStep( void );

Gets the current

op71Printf

printing step direction. Each step

direction is independent of the other, and is treated as an 8-bit signed

value. The actual step increments depend on the height and width of the

font being displayed, which are multiplied by the step values.
Use

op71SetPfStep

to control the x and y printing step direction.

RETURN: The x step is returned in the MSB, and the y step is

returned in the LSB of the integer result.

 void op71SetPfStep( int stepX, int stepY );

Sets the

op71Printf

printing step direction. The x and y step direc-

tions are independent signed values. The actual step increments depend

on the height and width of the font being displayed, which are multi-

plied by the step values.
Use

op71GetPfStep

to examine the current x and y printing step

direction.
PARAMETERS:

stepX

is the

op71Printf

x step.

stepY

is the

op71Printf

y step.

 void op71Printf( int x, int y, struct _fontInfo

*pInfo, char *fmt, ... );

Prints a formatted string (much like

printf

) on the LCD screen. Only

character codes that exist in the font are printed, others are skipped

over. For example, '\b', '\t', '\n', and '\r' (ASCII backspace, tab, new line

and carriage return, respectively) print if they exist in the font, but have

no effect as control characters.
Use

op71SetPfStep

to control or use

op71GetPfStep

to examine

the current x and y printing step direction.
PARAMETERS:

is the x-coordinate of the text (left edge).

is the y-coordinate of the text (top edge).

pInfo

is a pointer to the font descriptor.

fmt

is a pointer to the format string...

Keypad Programming

The same library used in Dynamic C v. 5.xx,

KP_OP71.LIB

, is used with

Dynamic C 32. The function calls are described later in this chapter.

Summary of Contents for OP7100



























































































































Search results

Summary of Contents for OP7100

Reviews:

Related manuals for OP7100

Brands by name

Popular brands

Z-World OP7100, User Manual

Search results

Summary of Contents for OP7100

Reviews:

Related manuals for OP7100

Brands by name

Popular brands