Z-World OP7100 User Manual Download Page 14

Page: 14 / 122

OP7100

Overview

(

Development and Evaluation Tools

The OP7100 is supported by a Tool Kit that include everything you need

to start development with the OP7100.
The Tool Kit includes these items.
Serial cable
24 V DC power supply capable of delivering 1.1 A
Users manual with schematics
An optional Serial Interface Board (SIB) is available to program the

OP7100 when a second RS-232 serial port is needed by the application

being developed.

For ordering information, call your Z-World Sales Representa-

tive at (530) 757-3737.

Software

The OP7100 is programmed using Z-Worlds Dynamic C, an integrated

development environment that includes an editor, a C compiler, and a

debugger. Library functions provide an easy and robust interface to the

OP7100.

Z-Worlds Dynamic C reference manuals provide complete

software descriptions and programming instructions.

Summary of Contents for OP7100



























































































































Search results

Summary of Contents for OP7100

Reviews:

Related manuals for OP7100

Brands by name

Popular brands

Z-World OP7100, User Manual

Search results

Summary of Contents for OP7100

Reviews:

Related manuals for OP7100

Brands by name

Popular brands