!
PCB Assembly
Zener Diode
2
6
Previous Steps
Ground Pins
Solder Joints
Components
Zener Diode
PCB A
R7 1G
PCB B
~ Components List ~
Next, we can focus on diodes and resistors:
Solder the zener diode onto PCB A.
Solder resistor R7 onto PCB B by lifting one of
the resistor legs towards ground pin G.
Trim any excess with wire cutters after
soldering.
Double-check the orientation of
the diode against the PCB
marking.
Diodes can be sensitive to static
electricity so make sure you are
wearing cotton and discharged
before handling it.
Do not use the through-hole on
the PCB when lifting the resistor
leg and solder directly onto the
isolation turret.
~ Build Notes ~
