PCB Wiring
3
15
Now that the PCBs are assembled, we can link them
together by using silver teflon wires:
Cut and strip four pieces of wires to appropriate
lengths.
Wires should run from the back of each PCB.
Wire point G of PCB B to GG of PCB A from the
back of each isolated turret.
Repeat from A to AA, B to BB and C to CC.
If done correctly, the wires should collapse
nicely between the PCBs, facing away from each
other when assembled on the microphone body.
No need to twist the wires here.
You can choose to solder the
wires on the component side or
use the holes provided to run the
wires through to the solder side.
Silver teflon wires can be
difficult to strip with wire
strippers sometimes and would
benefit from a slight incision
with wire cutters beforhand.
Make sure you leave enough
length to the wires when linking
the PCBs together in order to
facilitate any troubleshooting
later on.
~ Build Notes ~
