YWH10 IP Phone User manual
Zhengzhou Yuneng Communication Co.,Ltd
Page 19 of 34
network segment.
With MGCP protocol used, the protocol service refers to Call Agent. Please check this
box according to system, and then fill service addr field with Call Agent IP address or
domain name.
With SIP protocol used, the protocol service refers to SIP Proxy Server. Check this
box according to system, and then fill service addr field with SIP Proxy Server IP
address or domain name.
With Net2phone protocol used, the protocol service refers to designated server. Please
check this box, and then fill the designated IP address or domain name into service
addr field.
Note
Designated Net2phone server IP address are: 216.53.3.52; 4.43.114.39; 4.43.114.38
or 205.228.245.8. Domain names are: call1.net2phone.com;
call2.net2phone.com;skip1.net2phone.com;skip2.net2phone.com;skip1.f8g9h0.net
or skip2.f8g9h0.net.
●
Service type
: This option is used to accommodate the miscellaneous requirements of the
system providers. When IP phone is connected to these systems, please select the
corresponding service type. Please also visit http://www. yntx.com for reference
configuration of some of these systems.
Common: no special requirements
Mediaring
:
use Mediaring prepaid
etalk: Use eTalk prepaid card by selecting this item. With eTalk selected here, please
select dialnum in dial plan drop down list and then fill 00 into dial number field.
Note
When eTalk card is used, besides above configuration, please set other parameters
as follows: service addr:
202.83.204.213
; service id: ETNSGK; account:
0117ETNS.If IP phone can not log in
202.83.204.213
,please try to use
202.83.204.213
. And if IP address of the phone is a private one, please do port
mapping on NAT device. Please refer to build in proxy document to get detailed
operation.
auvtech: Use Auvtech’s h323 system by selecting this item.
