YWH10 IP Phone User manual
Zhengzhou Yuneng Communication Co.,Ltd
Page 18 of 34
●
dns 2:
With static ip selected in iptype drop down list, please enter IP address of backup
DNS server here.
●
mac:
MAC address is the physical address supplied by the Ethernet NIC. YWH10 phone is
shipped from the factory with a unique algorism MAC address printed on the back of the base.
(2)protocol settings
Fig 9 Protocol Setting Page
●
protocol:
Select an item from dropdown list to set the protocol used by the phone.
h323: Select this item to set the phone use H323 protocol.
sip: Select this item to set the phone use SIP protocol.
mgcp: Select this item to set the phone use MGCP protocol.
n2p: Select this item to set the phone use Net2phone private system.
iax2:
Select this item to set the phone use IAX2 private system.
wp:
Select this item to set the phone use WP private system
Note
With Net2phone selected here, please set other necessary parameters: check use
service option, and then fill IP address or domain name of designated server into
service addr field; then set service port as 6801; fill account and password of
Net2phone card into account and pin fields.
●
use service:
Enable/disable service by checking/unchecking this box. Different service
responses different protocol as follows:
With H323 protocol used, the protocol service refers to the gatekeeper searching the
address. To let IP phone call each other by E.164 number, please check this box and
then fill the IP address or domain name of corresponding gatekeeper into service addr
field. Without this check box being selected, the phone can call by gateway or just by
dialing IP address of other IP phone or H323 device (such as Netmeeting) at the same