manualshive.com logo in svg

Yuxin YWH10, User Manual

Share
Download
Yuxin YWH10 User Manual Download Page 33

       

 

YWH10 IP Phone User manual   

 

Zhengzhou Yuneng Communication Co.,Ltd                                                                                         

  Page 32 of 34 

 

                                                                                                                                           

Press

【

Hand free

】

to speak to the other party. When the call is over,    press   

【

Hand free

】

again. 

(4) Hand free to handset 

While receiving the call with the 

【

Hand free

】

  pressed, pick up the handset to continue 

the call. When the call is over, put back the handset. 

 

Note 

 

When you communicate with the other party without lifting the handset, 

please do not exceed 40 CM from speaker. 

 

   

2, Place a call 

(1)

 

Call another YWH10 IP phone under the same Gatekeeper 

①

 Handset:

 Pick up the handset and listen for the Internet dial tone. Then dial the phone 

number you wish to call and press

【

#

】

or

【

Call

】

to end the dialing. Once the call connection has 

been established and the ring tone has sounded, wait for the other party to answer. When the 

other party answers, you can begin speaking. When the call is over, put back the handset. The 

dialed number has been saved into the buffer.

 

②

 Hand free

: Press

【

Hand free

】

and listen for the Internet dial tone. Then input the phone 

number you wish to call and press

【

#

】

or

【

Call

】

to end the dialing. Once the call connection has 

been established and the ring tone has sounded, wait for the other party to answer. When the 

other party answers, you can begin speaking. When the call is over, Press

【

Hand free

】

again. 

The dialed number has been saved into the buffer. 

③

 Blind dialing

: Use the keypad to enter the phone number you wish to call and then press

【

#

】

or

【

Call

】

  to make the call. Once the call connection has been established and the ring tone 

has sounded, wait for the other party to answer. When the other party answers, you can begin 

speaking. When the call is over,    Press 

【

Hand free

】

again. The dialed number has been saved 

into the buffer. 

(2) Place a call without login the Gatekeeper 

If YWH10A/B/C/D IP phone does not login the Gatekeeper, you can place a call by lifting the 

handset or pressing 

【

Hand free

】

and then inputting the IP address of the other party, and then 

pressing 

【

#

】

or

【

Call

】

 . 

Summary of Contents for YWH10




































Reviews:

No comments

Brands by name

Popular brands

Load more brands