YWH10 IP Phone User manual
Zhengzhou Yuneng Communication Co.,Ltd
Page 10 of 34
3, Connect the phone into the net
LAN users: Plug one end of the direct-connecting cable into RJ-45 jack which is located
in the back of phone, and connect the other end of calbe to hub. Please see figure5.
ADSL/Cable Modem users
：
Plug the RJ-45 Ethernet corssing-over cable into the RJ-45
Ethernet Jack. Plug the other end of the cable into an ADSL/Cable modem router port.
Figure5 LAN Phone connected into net
4, Start Phone
Turn on the phone by pulling the switch to ON. Verify that yellow ,green
and red lights are on
together, and then red light is off; green light blinks or is off ; yellow light blinks or is on.
which behalf the success of starting phone and phone enter into normal standby
.
Configuration
Four different ways can be used to configure YWH10 IP phone:Phone keypad set; Web
browser, Telnet commands and PalmTool configuration on computer.
1, Phone Keypad set
