YWH10 IP Phone User manual
Zhengzhou Yuneng Communication Co.,Ltd
Page 23 of 34
●
account
: With H323 protocol used, while calling card is set, please type the account of
chosen card into this field; while md5 account item selected in local type dropdown list,
enter ID here; while account is selected in local type dropdown list, enter H323 ID here.
While prefix item selected in use dialplan dropdown list, enter language indicating number,
card number and # here, such as 14589653185
＃
. With SIP system which requires
authentication, please put the username/account into this field. With MGCP protocol used,
please enter local endpoint id (eg., aaln/0) here. With Net2phone system used, enter
account of Net2phone card here.
●
pin:
With H323 protocol used, while calling card is set, please type the password of
chosen card into this field; while md5 account item selected in local type dropdown list,
enter password here. While prefix item selected in use dialplan dropdown list, enter
password and # here, such as 3185
＃
. With SIP system which requires authentication,
please put the password into this field. With MGCP protocol used, please enter domain
name here. With Net2phone system used, enter password of Net2phone card here.
Note
When MGCP protocol is used, some system requires adding “[]” outside the domain
name. So please fill the domain name with “[]” into pin fields, such as
［
voiptest.com
］
.
●
rtp tos
: Fill TOS segment of IP head package in RTP digital follow here.
●
register port:
The local UDP port registered with server to accept incoming handshaking
messages. The default port number for MGCP protocol is 2427. The default port number for
SIP protocol is 5060. For H.323 or Net2phone, any number between 1024 and 65535 is
acceptable.
●
signal port:
With H323 protocol used, signal port is Q.931 port using TCP protocol, can be
any number between 1024 and 65535.
