9
P
OWERING ON THE
H520
After registering, power on the H520 first by inserting a battery with the YUNEEC logo on the rear facing
up, gently push the battery into the rear of the H520 while lifting the rear lever on the back of the battery
pack. Push the battery all the way in and release the lever, give one final push on the rear of the battery to
ensure the battery is fully seated, a click will be heard as the lock engages. Ensure the battery is fully
seated and latched before proceeding. Press the power button on the top of the airframe near the nose.
Wait for the rising tone and arm lights to turn on, release the button. During start up the camera will
rotate to the front of the airframe and several tones will announce the aircraft’s readiness.
C
ONNECTING THE
ST16S
AND
H520
After the H520 has fully powered on, tap on the WiFi logo on the right side of the screen. Tap Link
Management, available cameras will appear in the window. Tap on the desired camera to connect the
ST16S and camera.
Note
: Do not install the propellers until a Compass and Accelerometer Calibration have been
completed. During these two calibrations, the airframe will be moved around and set
on the ground. Having the propellers installed may cause damage to the props,
motors, or arms, or may cause minor physical injury to the user.
