53
Map Type
The map type menu enables changing between Map Types for the Map overlay in the ST16S and the
Mission Planner menus: Street Map, Satellite Map or Terrain Map.
Mute
Mute will disable all audio on the ST16S and prevent audio warnings and advisory messages from being
spoken. Muting the audio is valuable when shooting wildlife or working in areas where audio may be a
distraction.
Save Telemetry Log After Each Flight
The default for this option is
enabled
. When checked, telemetry log recording will be enabled. Uncheck this
option to disable saving telemetry logs to the ST16S to save bandwidth and internal storage. It is
recommended that this setting remain enabled in the event of incident. Service personnel will be able to
“read” the flight and better understand what may cause system failure or pilot error. Check your
organization’s policy/operations manual for guidance.
Save Telemetry Log Even If Aircraft Was Not Armed
When this is checked, telemetry log recording will begin once the H520 is turned on and connected to the
ST16S. When unchecked, telemetry recording will not begin until the H520 is armed. Logs are stored to
the local ST16
S
memory and can be accessed by the “Export Data button” under Aircraft settings.
Clear All Settings On Next Start
Checking this box resets the ST16S and H520 to factory default settings at the next restart. Using this
option will clear all applied settings and requires a restart to restore default settings.
Announce Battery Lower Than
This setting allows the Pilot to set percentage (%) at which the low battery alarm will be triggered. Yuneec
recommends this remain at the default warning setting.
