43
NOTICE:
The captured pictures and videos are stored on the camera MicroSD card inserted in the camera.
CAMERA
PARAMETER
SETTING
The users can adjust the parameter settings when monitoring the ST16S Ground Station screen. On the
right side of the screen in the Camera menu, users may choose one of four display modes for the images
shown on the screen.
1)
“Picture In Picture” :
Press the “Picture In Picture” option, the RGB images and infrared images will
be displayed separately on the screen with the IR image displayed in the upper left corner.. The center-
point temperature detected by the infrared camera will be shown at the center of the infrared images.
2)
“Blend” :
Choose the “Blend” option, the visible images and infrared images will be overlapped on
the screen. The center-point temperature detected by the infrared camera will be shown at the center of
the infrared images.
3)
“Full” :
Press the "Infrared" option and the screen will only display the infrared images. The center-
point temperature detected by the infrared camera will be shown at the center of the infrared images.
4)
“OFF” :
Tap the “OFF” option and the screen will only display the RGB images.
OTHER
SETTINGS
The CGOET for H520 may be operated using only presets, or manually controlled to specific user settings.
If at any time a user-selected value becomes confusing or undesired, selecting a preset will clear all user-
settings.
ROI:
Region of Interest. Temperature measurement is taken from either a SPOT (single pixel point) or
from a Center Area on the screen, averaging the temperature in that specific region. In the illustration
below, the Region Of Interest shows a general temperature around the cup.