External appearance and controls
Lens/Emitter
Signal receiver
Eyepiece
“ON” Switch
“Mode” Switch
Battery compartment
Battery cap
1
2
3
4
5
6
7
Reading the LCD display
“Ready”
– indicates that the unit is ready for
use.
“Range”
– range measurement function is
activated.
“Speed”
– speed measurement function is
activated.
“
” – indicates laser signal transmission.
“
” – target indicator. Aiming mark –
centre this over a target.
“ ” – distance is shown in four digits. In
case of error four dashes show up “----”.
“KM/h”
– indicates speed (kilometers per
hour), “M/S” (meters per second). Indications
“M” (meter) and “Y” (yard) are used in range
measurement mode.
“Quality >>>>> ”
– target quality indicator.
“
”
– low battery indicator.
Battery installation
Unscrew the battery cap counterclockwise
(7)
.
Insert a CR2 battery observing polarity shown in the battery
compartment (see diagram on page 2).
Replace the battery cap, screwing it on clockwise. Do not
overtighten.
4
45
1
2
3
4
5
6
7
+
-
CR2/3V