manualshive.com logo in svg

YSI 3200, Operation Manual

Share
Download
YSI 3200 Operation Manual Download Page 32

Data Storage and Retrieval 

 

Section 4 

If you wish to store a record at a location other than the current one, use the [UP], [DOWN] and 
[DIGIT] soft keys to select the memory location desired. 

If the current record location contains data, you will see the following display to warn you that 
the current memory location contains data. 

 

3.152

 uS/cm

 

 

11:33

AM

 24.38°

C

 

 

 

 

 

UP 

DOWN 

DIGIT 

STORE 

STORE 

Record # 
[01] 
FULL

 

Record number

WARNING 

 

If the current memory location already contains data and you press [STORE], the current readings 
will be stored and the previous readings will be erased. 

NOTE:  There is NO way to restore previous data once it has been erased. 

When you have finished storing records, press [MODE] two times to return to Operation mode. 

 
4.2 REVIEW 

From the Data menu, press the [REVIEW] soft key to enter Review mode and display the 
following menu. 

 

2/19/97 8:45

AM

 

REVIEW 

13.15

 

uS/cm

 24.38°

C

 

 

record  # 

 [ 

0]

 

69.70 

Kohm-cm

 0.4 

ppt

 

 FULL 
 K=1.090 
 1.91%/°C 

 

RECALL 

SEND ALL 

CLEAR 

CLR ALL 

 

Review is used to recall stored readings (records), send stored readings via the RS232 serial port 
or delete stored readings. 

YSI Incorporated 

Model 3200 

28

 

 

Summary of Contents for 3200























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands