YSI 1500 Sport User Manual Download Page 62

Page: 62 / 134

6----16

NOTE:

NOTE: The printer must be placed in the correct position and turned on in order
to receive the data. Refer to Figure 3.6 for the printer placement if you are
unsure.

Printing Today's Re

Printing Today's Results

sults

Go to Main menu by pressing the MENU

MENU key until the display reads.

RUN

RUN----0 RECALL

0 RECALL

0 RECALL----1

SETUP

SETUP----2 DIAG

2 DIAG

2 DIAG----3

Select Recall by pressing 1

1, then ENTER

ENTER

ENTER.

SAMPLES LCD

SAMPLES LCD----0

PRINT----1 XMIT

1 XMIT

1 XMIT----2

Select Print by pressing 1

1, then ENTER

ENTER

ENTER.

PRINT ALL

PRINT ALL----0

BY: DATE

BY: DATE----1 ID

1 ID

1 ID----2

Select Date by pressing 1

1, then ENTER

ENTER

ENTER.

DATE MM/DD/YY

DATE MM/DD/YY
XX/XX/XX

XX/XX/XX

NOTE:

NOTE: The current date is what will appear on the display.

Press ENTER

ENTER

ENTER. The display will be active during the printing process showing

each result as it is printed. It is not possible to halt the printing

It is not possible to halt the printing

It is not possible to halt the printing once it has

once it has

started.

started. Once finished the display will return to the RECALL menu.

SAMPLES LCD

SAMPLES LCD----0

PRINT----1 XMIT

1 XMIT

1 XMIT----2

Use the MENU

MENU key to return to the Main menu.

Summary of Contents for 1500 Sport







































































































































Search results

Summary of Contents for 1500 Sport

Reviews:

YSI 1500 Sport, User Manual, Page: 62 / 134

Search results

Summary of Contents for 1500 Sport

Reviews: