YSI 1500 Sport, User Manual, Page: 54 / 134

6 6 6 6----8 8 8 8
MM/DD/YY HH:M MM/DD/YY HH:M MM/DD/YY HH:M MM/DD/YY HH:MM M M M
#XXX XX.XXmmol/L #XXX XX.XXmmol/L #XXX XX.XXmmol/L #XXX XX.XXmmol/L
The sample result will be displayed along with the ID#, date and time.
Linearity failure means that the instrument is not performing to specifications at
the upper limit of the dynamic range. This could be due to poor membrane
performance, check the date the membrane was installed to verify that it has not
expired, (also verify that the membrane has not been subjected to drying out as a
result of no fluid in the sample chamber). The acceptable ranges are:
15 mmol: 15 mmol: 15 mmol: 15 mmol: 14.30 to 15.70 mmol (128.3 to 141.7 mg/dL)
30 mmol:
30 mmol: 30 mmol:
30 mmol: 28.50 to 31.50 mmol (256.5 to 283.5 mg/dL)
If the result is not within these ranges, replace the membrane, allow time for it
to break in and repeat the calibration process. If the result is acceptable press
MENU
MENU MENU MENU and the display will read:
SAMPLE
SAMPLE SAMPLE
SAMPLE----0
0 0
0
CAL CAL CAL CAL----1 PRIME 1 PRIME 1 PRIME 1 PRIME----2 2 2 2
You are now ready to measure samples.
6.2 Sample Cycle
With the SPORT calibrated as described, you can proceed to measure lactate
values in blood samples or plasma.
WARNING: WARNING: WARNING: WARNING: If you calibrate with the Syringepet, measure measure measure measure with the Syringepet.
If you calibrate with the injector, measure
measure measure
measure with the injector. Otherwise, you
may get incorrect values.
REMEMBER:
REMEMBER: REMEMBER:
REMEMBER: The Reference solution is only used in Auto mode. The
following sample cycle is illustrated as if the reference solution were indeed
being used. If you are operating in Manual mode ignore the messages relative to
the Reference solution. Press the MENU
MENU MENU MENU key until the Main menu appears:
RUN
RUN RUN
RUN----0 RECALL
0 RECALL 0 RECALL
0 RECALL----1
1 1
1
SETUP
SETUP SETUP
SETUP----2 DIAG
2 DIAG 2 DIAG
2 DIAG----3
3 3
3
Select Run by pressing ENTER ENTER ENTER ENTER.
SAMPLE SAMPLE SAMPLE SAMPLE----0 0 0 0
CAL CAL CAL CAL----1 PRIME 1 PRIME 1 PRIME 1 PRIME----2 2 2 2