YSI 1500 Sport User Manual Download Page 56

Page: 56 / 134

6----10

If the concentration of the sample exceeds the measurable limits of the
instrument, the following message will appear:

ERROR: OVERRANGE

ERROR: OVERRANGE
WASHING...

WASHING...

If you see this display, no result will be stored or displayed, press MENU and
refer to Section 9 Troubleshooting.

If there is no problem, the display will read

#XXX XX.XXmmol/L

#XXX XX.XXmmol/L
WASHING...

WASHING...

MM/DD/YY HH:MM

MM/DD/YY HH:MM
#XXX XX.XXmmol/L

#XXX XX.XXmmol/L

The sample result will be displayed along with the ID#, date and time.

Press MENU

MENU to return to the Run menu. The previous result, ID#, date and

time, will be stored in memory until it is deleted

SAMPLE

SAMPLE----0

CAL

CAL----1 PRIME

1 PRIME

1 PRIME----2

6.3 Recalling Stored Results

The SPORT allows you to recall any stored result. Results may be recalled by
ID#, by date, or all results may be recalled in chronological order. The following
sections identify the different ways to do this.

Recalling All Sample Results

Go to the Main menu by pressing MENU

MENU until the display reads

RUN

RUN----0 RECALL

0 RECALL

0 RECALL----1

SETUP

SETUP----2 DIAG

2 DIAG

2 DIAG----3

Summary of Contents for 1500 Sport







































































































































Search results

Summary of Contents for 1500 Sport

Reviews:

YSI 1500 Sport, User Manual, Page: 56 / 134

Search results

Summary of Contents for 1500 Sport

Reviews: