manualshive.com logo in svg

YSI 1500 Sport, User Manual, Page: 133 / 134

Share
Download
YSI 1500 Sport User Manual Download Page 133

 

 

19

19

19

19----1

1

1

1  

19. Appendix J–Required Notice 

The Federal Communications Commission defines this product as a computing 
device and requires the following notice: 

This equipment generates and uses radio frequency energy and if not installed 
and used properly, may cause interference to radio and television reception. It 
has been type tested and found to comply with the limits for a Class A or Class 
B computing device in accordance with the specification in Subpart J of Part 15 
of FCC Rules, which are designed to provide reasonable protection against such 
interference in a residential installation. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does 
cause interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

• 

reorient the receiving antenna 

• 

relocate the computer with respect to the receiver 

• 

move the computer away from the receiver 

• 

plug the computer into a different outlet so that the computer and 
receiver are on different branch circuits. 

If necessary, the user should consult the dealer or an experienced 
radio/television technician for additional suggestions. The user may find the 
following booklet prepared by the Federal Communications Commission 
helpful: "How to Identify and Resolve Radio-TV Interference Problems." This 
booklet is available from the U.S. Government Printing Office, Washington, 
D.C. 20402, Stock No. 0004-000-00345-4. 

Summary of Contents for 1500 Sport







































































































































Reviews:

No comments