YSI 1500 Sport, User Manual, Page: 50 / 134

6 6 6 6----4 4 4 4
Press ENTER ENTER ENTER ENTER, the display will read...
ENTER ID# XXX ENTER ID# XXX ENTER ID# XXX ENTER ID# XXX
No ID# is required so press ENTER ENTER ENTER ENTER, the display will read...
WAIT... WAIT... WAIT... WAIT...
INJECT SAMPLE... INJECT SAMPLE... INJECT SAMPLE... INJECT SAMPLE...
Inject the sample. When you remove the Syringepet or Injector, you will see
RUNNING... RUNNING... RUNNING... RUNNING...
STIR ON
STIR ON STIR ON STIR ON
RUNNING...
RUNNING... RUNNING...
RUNNING...
REF ON
REF ON REF ON REF ON
#XXX XX.XXmmol/L #XXX XX.XXmmol/L #XXX XX.XXmmol/L #XXX XX.XXmmol/L
WASHING...
WASHING... WASHING... WASHING...
MM/DD/YY HH:MM
MM/DD/YY HH:MM MM/DD/YY HH:MM
MM/DD/YY HH:MM
#XXX XX.XXmmol/L
#XXX XX.XXmmol/L #XXX XX.XXmmol/L
#XXX XX.XXmmol/L
The sample result will be displayed along with the ID# (in this case 000), date
and time.
Linearity failure means that the instrument is not performing to specifications at
the upper limit of the dynamic range. This could be due to poor membrane
performance, check the date the membrane was installed to verify that it has not
expired, (also verify that the membrane has not been subjected to drying out as a
result of no fluid in the sample chamber). The acceptable ranges are:
15 mmol: 15 mmol: 15 mmol: 15 mmol: 14.30 to 15.70 mmol (128.3 to 141.7 mg/dL)
30 mmol:
30 mmol: 30 mmol:
30 mmol: 28.50 to 31.50 mmol (256.5 to 283.5 mg/dL)