yrEyes Touch & Talk Mirror TT01, Reference Manual

Page: 14 / 40

ENGLISH
9
MEMORIZATION OF VOICE TAGS SIEMENS
Your telephone allows you to use the TT01’s memory to record voice tags associated to the names in the phone book. With
the TT01, it is possible to use this feature to recall names from the phone book by pressing the green button and repeating
the name after the tone “beep” (as seen in the paragraph “Making a call in TOUCH&TALK mode”).
Procedure:
Press and hold the red button, the phone book will then be displayed on the telephone.
Select a name and press “Select”, after which follow the voice instructions.
PAIRING
ERICSSON and Sony Ericsson: R520, T39, T68, T68M, T68i
When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your
TT01. Once this is done, connection between your telephone and your hands-free kit will take place automatically as soon
as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is established.
IMPORTANT : the hands free kit is operative only when the car ignition is on (IGN). For Ericsson R520m, T68 and
T39, the infrared (IrDA) function has to be disabled for TT01 to operate correctly. Comply with the following
recommendations: Go into the Menu, go to "Extras";
until " Infrared port", press "Yes", then until "Disabled"
and confirm by pressing "Yes".
Procedure :
Switch on the telephone; turn on the ignition, the blue led shows that the hands free kit is supplied. Perform the following
sequence on Ericsson R520m, T68, T68M, T68i and T39 telephones. The first time you will hear the instruction ”PLEASE
PAIR DEVICE”, otherwise reset the TT01 by pressing and holding the red/green buttons at the same time.
After turning on the ignition of your car, carry out the following sequence for Ericsson R520m, T68/T68m and T39/T39m
telephones.
For the T68 and T68i, go to "Connect", then "Bluetooth®", then follow the instructions below.
For the R520 and the T39, press
until "Extras", then until "Bluetooth®" and press "Yes". Press until "Paired
devices", press Yes. Press "Add device", and "Yes ". Select "Phone initiates", press "Yes" then press and select
"Headsets", press "Yes", then "Prepare headset" is displayed. "Searching" is displayed.
When "TT01 CK3.xx" is displayed, click on "Yes".
"Add to connected devices" - press "Yes". "Connection key" or “Enter Password” is displayed, enter 1234, then press "Yes".
The connection phase is now complete and "Pairing succeeded" is displayed on your screen.
For further information, please refer to your Ericsson or Sony Ericsson telephone’s instructions.
PAIRING
ERICSSON and Sony Ericsson:
T606, T608, T610, T616, T618, T630, Z600, Z608
When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your
TT01. Once this is done, connection between your telephone and your hands-free kit will take place automatically as soon
as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is established.
IMPORTANT : the hands free kit is operative only when the car ignition is on (IGN). For Ericsson T610, the infrared
(IrDA) function has to be disabled for TT01 to operate correctly. Go into the main Menu, select "CONNECTIVITY"
scroll to IR activation, select "DISABLED" and confirm by pressing "SELECTION".
Procedure :
Switch on the telephone; turn on the ignition, the blue led shows that the hands free kit is supplied. Perform the following
sequence on the telephone. The first time you will hear the instruction ”PLEASE PAIR DEVICE”, otherwise reset the TT01
by pressing and holding the red/green buttons at the same time.
Your phone is on. Turn on the ignition key. Proceed with the following sequence to do the pairing
Select “ CONNECTIONS”, then “BLUETOOTH®”. Select “HANDS FREE” and validate by clicking on “SELECTION”.
“PERS.HANDS FREE” is indicated on the display, validate with “SELECT”, then “NEW HANDS FREE”, then select “Add”
“Searching for hands free devices” «WAIT» is displayed. The T610 phone looks for all devices equipped with a hands free
profile. After a few seconds «TT01 CK3.xx» is displayed, validate by clicking on “SELECT”, enter 1234 as passkey and
confirm. The pairing phase comes to an end when «TT01 CK3.xx added to my peripherals» is displayed.
ENGLISH
10
PHONE CONFIGURATION ERICSSON and Sony Ericsson
For managing Bluetooth® devices, Sony Ericsson telephones allow using two different profiles: “Headset” and “Hands
free”. The latter has remarkable advantages, but is only available for some Sony Ericsson models (consult the following
paragraphs). The information needed to configure the two profiles is given below.
Bluetooth® “Headset” and “Hands free” Profiles:
•
Software version search:
The firmware determines the compatible Bluetooth® profile supported by your phone. Follow the sequence to
learn what firmware version you have:
From the phone's splash screen, using the joystick,
Press once to the right.
Press on *
Press twice to the left,
Press on *
Press once to the left,
Press on *
In the
« SERVICE INFO» menu, «SOFTWARE INFO», the firmware version is the information displayed on
the first line.
•
Bluetooth® “Headset” and “Hands free” Profiles:
The advantages of the use of the Headset profile are Bluetooth® link to the TT01 connected only during calls
(low power consumption for the battery) and availability of the "MultiTel" option (see details on "MultiTel" option
below in the TT01 MENU section)
The advantages of the use of the «Hands free» profile are the possibility to use the phone’s vocal recognition
(no voice tags in the TT01), dual call and Private mode transfers by using the green button and the use of
several TT01s/Bluetooth® audio devices with the same handset (no need to select the "Set as First" every time
you use the TT01)
For later software versions than R5C, the T68i features the «Hands free» profile as well as the «Headset» profile. All the
following telephone firmware versions feature «Hands free» and «Headset » profiles: T606,T608, T610, T616, T618, Z600
and Z608. The «Hands free» profile is used by default with the TT01. A new feature appeared on the latest versions of
Sony Ericsson phones, allowing the support of either the “hands free” or the “headset” profile : the “Car Hands free” feature.
“Car Hands free”
A new function called “Car Hands free” is available for the following phones :
T68i phones with the software version R8A015 or later
T606/T610/T618 phones with the software version R1L013 or later
T616 phones with all software versions
Z600 phones with the software version R2D001 or later
Z608 phones with the software version R2E004 or later
“Car Hands free” enables the phone to be compatible to the “Headset” profile or to the “Hands free” profile only
(“Connections” menu then “Bluetooth®”, then “Options”). In order to choose between “Headset” and “Hands free”, select the
corresponding profile in the “Car Hands free” menu. The “Powersave” mode activates the Headset profile.
The “Advanced” mode activates the Hands free profile.
OPERATION Sony Ericsson
Important: Sony Ericsson telephones also allow using the “TT01 MENU” evolved functions (TT01 own voice tags,
automatic phone book synchronization, wordspotting). In the following section dedicated to base communication,
the functions that can be performed without using the “TT01 MENU” are described, while evolved functions are
described in the section dedicated to communication.