background image

youngmangroup.com

23

Platform Height 2.00 Metres

1. Erect the Safety Cage as described on pages 8 to 10. 

    Refer to the diagrams on page 24 and 25.

2. Place your foot on 

RUNG 9

 and lift 

RUNG 3

 on the LEFT frame until locked.

3. Place your foot on 

RUNG 9

 and lift 

RUNG 3

 on the RIGHT frame until locked.

4. Place your foot on 

RUNG 9

 and lift 

RUNG 4

 on the RIGHT frame until locked.

5. Place your foot on 

RUNG 9

 and lift 

RUNG 4

 on the LEFT frame until locked.

6. Place your foot on 

RUNG 9

 and lift 

RUNG 5

 on the LEFT frame until locked.

7. Place your foot on 

RUNG 9

 and lift 

RUNG 5

 on the RIGHT frame until locked.

8. Place your foot on 

RUNG 9

 and lift 

RUNG 6

 on the RIGHT frame until locked.

9. Place your foot on 

RUNG 9

 and lift 

RUNG 6

 on the LEFT frame until locked.

10. Attach the Platform to 

RUNG 3

 as described on pages 11 and 12.

11. See ‘Fitting the Platform Stabilisers’ described on pages 14 and 15.
12. Extend and lock a platform stabiliser above the rung containing the 

RED

 

      bracket until 

RED

 shows in the viewing window in the stabiliser. Ensure it is   

      locked.
13. Place the stabiliser hook over the 

RED

 bracket and push down to lock it 

      in place.
14. Repeat steps (12) and (13) for each of  the other platform stabilisers.
15. Fit the Toe boards as described on page 13.
16. Deploy the ground stabiliser legs as described on page 7.

Step 5: Setting the Platform Height

Platform Height 
Extend Rungs 
3, 4, 5 & 6

7

 

Rung

  

2.00m

  

Summary of Contents for TTA02





































Reviews: