background image

youngmangroup.com

Podium

Option 1 and Option 2

1. Hold both ends of  

RUNG 1

 and place one foot on 

RUNG 9

.

2. Lift 

RUNG 1

 until it locks in place. A click will be heard when it locks. This has  

    lifted the hand guardrail.

3. Repeat steps (1) to (2) on the opposite frame.

    Note. There are a pair of  hand rails and knee rails on the left and right frames of  

    the Tower. The lower part of  each pair comprises a fixed side rail, and an upper
    adjustable part. The front rail is on the right side and the rear rail on the left.

4. Hold the yellow cover on the end of  the left knee rail using your thumb and 

    fingers, and push it towards its end of  the rail. Hold it in this position while you 

    lift the end to unfasten it from its anchor point.

5. Rotate the anchor point through 90 degrees to face the opposite side frame.

6. Rotate the rail end towards the opposite frame. See Figures 1.5 & 1.6 on page 10.

7. Extend the rail until you hear two clicks. This tells you that the 3-part rail has been

    securely locked in its extended position. Carefully let the rail hang down and rest

    on the platform.

8. Repeat steps (4) to (7) for the left handrail.

9. Repeat steps (4) to (7) for the front knee rail and front handrail to complete the

    erection of  the safety cage.

Ground Stabilisers (both options)

1. Unlock the castors and push the Podium to its working position.

2. Lock the castors by pushing down on the locking lever with your foot.

3. On 

RUNG 9

, slide the red button towards the centre of  the rung and rotate the

    stabiliser leg until it is near the required position. Release the button and rotate the

    ground stabiliser a little further either way until you hear the locking mechanism

    click in.

4. Repeat for the other three stabiliser legs.

5. Deploy a stabiliser leg by depressing its release lever until the base of  the leg is in

    contact with the surface. Turn the adjuster to tighten and where necessary to raise

    the Podium to be horizontal. Repeat for the other stabiliser legs as required or

    allowed.

7.1

7.2

30

Summary of Contents for TTA02





































Reviews: