Youngman TTA02, Use And Care Instructions Manual

Page: 13 / 36

youngmangroup.com
Step 3: Fitting the Toe Board
13
The Toe board is supplied as six sections in a canvas carry bag with Toe board
fixing brackets (x8) and cross-head screws (x32). Screw the brackets into the
tapped holes along the side of the platform as shown in Figure 3.1. The Toe boards
are supplied ready to use. Figure 3.1 shows the front Toe boards being fitted.
The front and rear boards have locating pins fitted which engage with the Toe board
brackets on the edge of the platform. Note that the rails use different spacing
between the locating pins. The side toe boards do not have pins but each have four
hooked - shaped lugs that engage with slots in the edges of the front and rear toe
boards.
1. Take a section fitted with pins and align the pins with the receptacles (from
above) and lower it into place, Figure 3.1.
2. Repeat for the other three sections with pins.
3. Take a side Toe board and align the lugs with the slots in the front/rear toeboards,
see Figure 3.2.
4. Lift the front and then the rear Toeboards a little (1). Guide the lugs into the slots
(2). Lower the front and rear toe boards (3) to lock together. The side toe board
cannot now be removed without lifting the front and rear toe boards.
5. Repeat for the other side toe board to complete.
3. FITTING THE TOE BOARD
The Toe board is supplied as six sections in a canvas carry bag with Toe board fixing
brackets (x8) and cross-head screws (x32). Screw the brackets into the tapped holes
along the side of the platform as shown in Figure 3.1. The Toe boards are supplied
ready to use. Figure 3.1 shows the front Toe boards being fitted.
The front and rear boards have locating pins fitted which engage with the Toe board
brackets on the edge of the platform. Note that the rails use different spacing between
the locating pins. The side toe boards do not have pins but each have four hooked -
shaped lugs that engage with slots in the edges of the front and rear toe boards.
1.
Take a section fitted with pins and
align the pins with the receptacles
(from above) and lower it into place,
Figure 3.1.
2.
Repeat for the other three sections
with pins.
3.
Take a side Toe board and align the
lugs with the slots in the front/rear
toe boards, see Figure 3.2.
4.
Lift the front and then the rear Toe
boards a little (1). Guide the lugs
into the slots (2). Lower the front and
rear toe boards (3) to lock together.
The side toe board cannot now be
removed without lifting the front and
rear toe boards.
5.
Repeat for the other side toe board
to complete.
14
TOE BOARD
FIXING BRACKET
TOE BOARD
FITTED
FRONT OR REAR
TOE BOARD
PLATFORM
TOE BOARD
FIXING BRACKET
CLOSE UP OF
TOE BOARD
BRACKET
SLOPING
SURFACE
(TOP)
3.1
1 3
SIDE
TOE BOARD
REAR
TOE BOARD
FRONT
TOE BOARD
LOCATING
PINS
2
3.2
3.1
3. FITTING THE TOE BOARD
The Toe board is supplied as six sections in a canvas carry bag with Toe board fixing
brackets (x8) and cross-head screws (x32). Screw the brackets into the tapped holes
along the side of the platform as shown in Figure 3.1. The Toe boards are supplied
ready to use. Figure 3.1 shows the front Toe boards being fitted.
The front and rear boards have locating pins fitted which engage with the Toe board
brackets on the edge of the platform. Note that the rails use different spacing between
the locating pins. The side toe boards do not have pins but each have four hooked -
shaped lugs that engage with slots in the edges of the front and rear toe boards.
1.
Take a section fitted with pins and
align the pins with the receptacles
(from above) and lower it into place,
Figure 3.1.
2.
Repeat for the other three sections
with pins.
3.
Take a side Toe board and align the
lugs with the slots in the front/rear
toe boards, see Figure 3.2.
4.
Lift the front and then the rear Toe
boards a little (1). Guide the lugs
into the slots (2). Lower the front and
rear toe boards (3) to lock together.
The side toe board cannot now be
removed without lifting the front and
rear toe boards.
5.
Repeat for the other side toe board
to complete.
14
TOE BOARD
FIXING BRACKET
TOE BOARD
FITTED
FRONT OR REAR
TOE BOARD
PLATFORM
TOE BOARD
FIXING BRACKET
CLOSE UP OF
TOE BOARD
BRACKET
SLOPING
SURFACE
(TOP)
3.1
1 3
SIDE
TOE BOARD
REAR
TOE BOARD
FRONT
TOE BOARD
LOCATING
PINS
2
3.2
3.2