Frequency Response
(Tone and graphi c EQ flat) +/- 2dB, 20Hz - 20KHz
T.H.D. (L&R Out with -10dB input)
0.03%
Input Refered Noise (to Line Out)
-119 dBv @ 150 ohms
Phantom Power
48 volts
Max. Gain to Line Out (Mic input)
+72 dB (Mic Input) + 56 dB (Line Input)
Digital Signal Processor Effects
Dual Mode, 16 bits, 255 sounds total
Primary Graphic Equalizer
9-Band (stereo) 63Hz to 16kHz
Seconary Graphic Equalizer
2 x 9-Band (mono) 63Hz to 16kHz
EQ (mono channels)
LOW, MID-SWEEP, & HIGH
EQ (stereo channels)
LOW, LOW MID, MID & HI
Effects Sends / Monitor Sends
3
post
-fade, 2
pre
-fade
Channel Inserts
ch. 7-12 (PM16), ch. 13-18 (PM22)
COP (Channel Overload Protection)
ch. 1-6 (PM16), ch. 1-12 (PM22)
Balanced XLR Channel Inputs
ch. 1-12 (PM16), ch. 1-18 (PM22)
Balanced ¼-inch Channel Inputs
ch. 1-16 (PM16), ch. 1-22 (PM22)
Unbalanced RCA Channel Inputs
ch. 13-16 (PM16), ch. 19-22 (PM22)
Hum Cancelling Line Level Outputs
L&R, Mon1, Mon2 (all ¼-inch TRS) (EFX2) (AUX)
Hum Cancelling Line Level Inputs
Amp A, B, C, & D (¼-inch TRS)
Main Amp Outputs
Amp A and B: 2 x ¼-inch and Speakon™
Amp A and B: ¼-inch and Speakon™ (export)
Monitor Amp Outputs
Amp C and D: 2 x ¼-inch
Amp C and D: ¼-inch and Speakon™ (export)
AMPLIFIER SPECIFICATIONS
Power Output (0.1% THD 1kHz)
MAIN
4-ohms
800W
8-ohms
450W
MON
4-ohms
275W
8-ohms
140W
THD (Total Harmonic Distortion)
MAIN
4-ohms
1kHz <0.04%
20Hz - 20KHz <0.1%
MON
4-ohms
1kHz <0.004%
20Hz - 20KHz <0.04%
Hum and Noise
MAIN
-106dB
MON
-108dB
Input Sensitivity
1.4 VRMS for full output
Amplifier Gain
MAIN
32dB
MON
24dB
Input Impedance
20KOhms Balanced 10Kohms Unbalanced
Protection
Thermal / Load / DC (2)
Cooling
2 Variable speed DC fans
Transformer Type
Toroi dal
FEATURES
Master EQ / Monitor 1 EQ / Monitor 2 EQ
Ye s / Ye s / Ye s
Headphone Monitor Features
Level AFL/PFL Switch, ¼-inch TRS Output
Internal Effects Footswitch
Yes
Full-Power Indicator (amplifier)
Yes (total 4)
12VDC Little-Lite™ Connector
Ye s (BNC)
VU-Meter
2 x 12 LEDs Average / Floating peak
Solo Switches, Activity/Solo LEDs
All Channels, Mon1, Mon2, and Effects Returns
Mute Switches, Clip/Mute LEDs
All Channels
Hi-Pass Filter Switches
ch. 1-12 (PM16), ch. 1-18 (PM22)
POWER REQUIREMENTS
Mixer & Power Amplifier
< 1440 watts avg.
Weight
PM16: 68 lb (30.8 Kg)
PM22: 71 lb (32.2 Kg)
Voltage AC
120 VRMS, 60Hz. 230 VRMS 50Hz (export)
Shape
Sinusoid
Test LOAD
0.1% high power laboratory load,
temperature stable.
Specifications and power ratings are measured with an AC line controlled under load to within 1% on all parameters.
SPECIFICATIONS
Summary of Contents for POWERMAX 1622
Page 1: ...OWNER S MANUAL MANUEL de L UTILISATEUR Y orkville OWNER S MANUAL MODEL TYPE YS1011 ...
Page 13: ...11 ...
Page 27: ...25 ...
Page 32: ...30 ...